Product Description
#154401
Overall Measurements: 25 1/2" x 14 5/8"
Assembly Includes:
1st (Rear) Air Tube 129093
2nd Air Tube 129091
3rd Air Tube 129092
4th (Front) Air Tube 129090
Left side manifold 103899
Right side manifold 103898
Installation instruction:
1. Remove the top of the stove by removing the four top bolts with a 10 mm socket. The front bolt can be removed by reaching in thought the front door. To remove the back bolt and two side bolts you will need to disconnect the flue pipe and reach in though the flue collar to access them. Carefully lift the top off of the stove and set aside
2. Carefully remove insulation blanket
3. Remove Cast Iron Baffles
4. Remove complete air chamber kit by unbolting it from the rear burn plate.
5. Install the new air chamber by bolting it to the rear burn plates, this will leave a small gap 1/8-1/4", fill this gap with Stove Cement being careful to not plug the holes in the air camber manifolds
6. Replace baffle
7. Reinstall insulation blanket, replace if needed
8. Inspect gasket on the bottom side of the top casting before reinstalling, replace if needed Gasket Kit 157050
9. Reinstall top of stove
10. Re-connect venting