Product Description
Jotul F 500 Replacement Vermiculite Baffle #220460
OEM Jotul Part Measures: 18 1/4" x 11 1/2"
This item replaces the older Cast Iron Baffles #10385912
Vermiculite baffle for use on the below models of Jotul only:
- Jotul F 500 Oslo Wood Stove Built between 2000 - 2020
Installation instruction:
1. Remove the top of the stove by removing the three top bolts with a 10 mm socket. The front two can be removed by reaching in thought the front door in-between the baffle and the front casting of the stove. To remove the back bolt you will need to disconnect the flue pipe and reach in though the flue collar to access the rear bolt. (see RED ARROWS in picture above to help locate three bolts locations)
Carefully lift the top off of the stove and set aside
2. Carefully remove insulation blanket
3. Remove and replace baffle
4. Reinstall insulation blanket, replace if needed Jotul F500 Oslo Insulating Blanket 129083
5. Inspect the 3/8" gasket on the bottom side of the top casting before reinstalling, replace if needed Gasket Kit 157050
6. Reinstall top of stove
7. Re-connect venting
Product Videos
Custom Field
Product Reviews
4 Reviews Hide Reviews Show Reviews
-
exact fit. did not have to remove the flue pipe or replace the gasket
took a while to get it
-
F500 Jotul full rebuild
Had the v1 Olso Jotul get overheated. Ruined the efficiency of the burn. This part was cracked in half. Needed a new one, with the fiberglass mat on top to keep it hot. Burns the wood fantastic now. Go through soo much less wood now.
-
Vermiculate Baffle
Fit perfectly
-
Vermiculite Baffle
The online catalog description was excellent and included a recommendation that the Vermiculite Baffle be purchased and used instead of replacing the burnt- out cast iron baffle with a new cast iron baffle. The ordering process was convenient. The product arrived well packaged and within the stated time frame. The Vermiculite baffle appears well engineered and fit the designated space above the air chamber tubes.
