Product Description
Avalon & Lopi Pellet Stove - 250-00011 Control Board (Circuit Board)
Before you buy: The most common issue that you may have when you think you need a control board, is that a fuse has blown either on the bottom of the control board and/or in the incoming power fuse holder on the back of your unit, depending on your stove it will use a 5mm x 20mm Fast Acting 125volt / 5amp fuse or Fast Acting 125volt / 6amp fuse
This OEM Travis Industries board replaces the older 93005000, 100-00202, 100-00203 & 100-00204 circuit boards.
UN-PLUG your stove or insert from the wall before attempting to remove or replace the control board from your stove
Includes:
- 250-00011 Control Board
- 250-00012 Jumper Plug
- Instruction
Compatibility:
- Avalon Arbor
- Avalon Astoria PS
- Avalon Astoria Bay PI
- Avalon Avanti PS
- Avalon Avanti Bay PI
- Avalon Newport PS
- Avalon Newport Bay PI
- Lopi Heritage PS
- Lopi Heritage Bay PI
- Lopi Leyden
- Lopi Pioneer PS
- Lopi Pioneer Bay PI
- Lopi Yankee PS
- Lopi Yankee Bay PI
This new board now comes with a harness plug and instruction sheet that explains when to use the plug and how to program the board for a large or small PS/PI as well as how to use the new diagnostic functions of the board.
Board is backwards compatible, however diagnostic feature will not be available on units with old style wiring harness.
Overview
This control board is compatible with all large and small pellet heaters manufactured from 1997. Circuitry on the board allows it to be programmed for either the large or small pellet heaters (these heaters use different voltage settings). See “Configuring the Control Board“ for details. It also includes a diagnostic feature that allows the end user to diagnose common problems without having to inspect the wiring or components. The indicator lights on the control board will display a maintenance code after a problem has been detected. See “Diagnostic Codes” for details. NOTE: the new wiring harness (250-00017) is required to utilize this feature.
