RSF Complete Blower Kit OPEL/DELTA/FOCUS 320/ONYX/PEARL

Product Description

RSF Complete Internal Blower Kit     -    OPEL/DELTA/FOCUS 320/ONYX/PEARL

BEFORE YOU BUY: This is a complete, factory OEM blower kit for most RSF wood burning fireplaces. This Blower replaces the older blower system that was several inches longer but this is the correct blower for the below modes of RSF fireplaces 

RSF Part Number:  FO-HB9   -   RFFOHB9       13" long x 4.5" x5"

Replaces: FO-FDHB5-N, FR-14.14.15, FR-14.14.14

Designed for the following RSF Models:

• RSF Onyx AP
• RSF Opel AP
• RSF Opel 2000
• RSF Opel 2
• RSF Opel 3
• RSF Delta
• RSF Delta 2
• RSF Focus 320
• RSF Pearl

The internal blower kit will increase the circulation of heated air in the room where the fireplace is installed. If you desire to distribute the heat in different rooms, please refer to central heating and zone heating kits  All wiring should be in accordance with local ordinances and the National Electric Code. INSTALLATION OF THE THERMAL SWITCH Only one thermal switch is required to operate the internal blower, the central heat blower or both. Open the bottom louver (central bottom louver on all Delta fireplaces).Through the bottom louver opening, attach the thermal switch to the inner right leg below the firebox. The magnet will hold the thermal switch in place. It should be spaced 1/8" from the bottom of the firebox, not in direct contact (see Figure 1).If you have purchased the ash pan option for your fireplace, make sure that it is still possible to remove the ash pan once the thermal switch is installed. PREPARATION OF THE BLOWER FOR ALL DELTA FIREPLACES Two metal brackets along with four self-tapping screws and four lock washers were provided with your fireplace. Please locate the parts; you will need them to install the internal blower.