Lopi & Avalon Wood Stoves - 98900320 Damper Plate

Product Description

Lopi Wood Stoves & Wood Burning Fireplace Inserts   -  Damper Plate

Lopi Stoves #98900320

Avalon Stoves #98900320

Bypass (damper) assembly, square, 9" x 9" x 5/16" thick with stiffener bars and 5-15/16" round hole in center. Bypass plate slides on this assembly.

Designed for use on many Avalon and Lopi Models including the below models:

• Lopi Liberty
• Lopi Freedom Insert
• Lopi Freedom Bay Insert
• Lopi 520-96
• Avalon Olympic
• Avalon 1196      NOTE: Used in Avalon 1196 units with SR# 2574 AND Greater Only

Removal & Replacement

1. Lift up on the front portion of the front three firebricks and remove.
2. Lift the front baffle support “Y” and rotate it forward until it can be removed.
3. Slide the center front firebrick forward and out the door opening. Then slide the side front firebricks towards the middle then out in the same manner.
4. Slide the center baffle support forward and out of the firebox.
5. Slide the rear firebrick forward and out of the firebox. NOTE: When the center rear firebrick is slid forward the damper plate will come to rest on the rear secondary air tube and rear air channel.
6. Slide the damper slider all the way forward.
7. Reach into the firebox and push up on the damper yoke until the damper yoke separates from the damper slider. Remove both the damper slider and damper plate by sliding them between the front two secondary air tubes. 
8 Place the NEW Damper Plate above the secondary air tubes in the rear center of the firebox.
9 Position the damper slider so the damper yoke inserts into the two tubes on the damper slider (make sure to have correct orientation). Then slide the damper slider over the damper plate until both are centered in the firebox.
10 Follow the instructions above in reverse order, starting with step number 5.