Product Description
Jotul C550 Wood Burning Insert - Right Side Blower #156477
4" x 4" x 8.75"
The new style blower is harder to install then the old style, you have easy access to the blower via the lower grill, but to remove the old and install the new blower you will have to take the face off of the insert.
Designed for use with below Jotul inserts:
- Jotul C550 Wood Insert
The dual blowers will enhance heat circulation around the firebox and out into the room. In the Automatic setting, the blowers are controlled by a heat activated switch (snapstat) that will only function when the speed control is ON. After the fire has been burning for a time, the snapstat will react to the heat and activate the blowers. Conversely, the blower will continue to operate until the snapstat cools as the fire wanes. The blowers will then shut off automatically.
Blower Maintenance
In order to ensure that the blower delivers many years of reliable performance, you should inspect it regularly and clean it of any household dust and debris that may have accumulated. This is particularly important if there are any pets in the home. Always disconnect the blower from its power source before cleaning. Use a vacuum with soft brush attachment to clean the blower housing and compartment, as well as the area under the insert firebox.
Product Videos
Custom Field
Product Reviews
2 Reviews Hide Reviews Show Reviews
-
Jotul Blower
This product was shipped within a day or two of ordering. Great company to deal with. I have ordered before from Ricky Mountain Stove with the same service I received this time.
-
right side blower & mount for Jotul Rockland wood stove insert
Had to remove 2 bottom trim rail nuts to fit these larger blowers into the mounts. These seem MUCH better than OEM, but time will tell. 10mm socket and was done in 10 minutes.