7/8" x 64" Low Density Door Gasket - Lopi and Avalon Stoves
#99900406 Replaces Part # 90-1511, 93005085 and 99900407
64" of 7/8" diameter door gasket rope. You may have some rope left over when finished. DO NOT STRETCH the rope when installing. This kit supplies enough rope for one single or a pair of double doors on various gas, wood or pellet appliances.
Replacing the Door Gasket: Remove the door by opening it and lifting it off the hinges. Remove the old gasket by stripping it away with a screwdriver or other tool (see the illustration below). Apply a line of gasket cement (#77 on our Website ) in the groove that follows the perimeter of the door. Insert the gasket into the groove.Do not stretch the gasket as you place it into the groove. Cut off any excess gasket when done. Allow 2 hours for the cement to dry. When re-installing the door, the gasket may need to be flattened by repeatedly opening and closing the door
Fits the following Avalon and Lopi pellet stove models:
400 from 1991 - 1992
900 from 1991 - 1996
Foxfire from 1993 - 1996
Avalon OlympicAvalon PendletonAvalon Rainier
Fits the following Lopi and Avalon wood stove models:
Avalon and Lopi 1250 Replaces 250-00170
Avalon and Lopi 1750 Replaces 250-00170
Lopi Flush Bay
Lopi Premier Answer
Lopi 380/440Lopi 380, 440, 520 You will need Stove Cement to install this gasket, we recommend Rutland Stove Cement
Warranty InformationRocky Mountain Stove warrants, to the original purchaser, that the Avalon - Lopi components above will be free of defects in material and workmanship for a period of one (1) year from the date of purchase. Rocky Mountain Stove will repair or replace, at its option, any or all of the components of an assembly determined by Rocky Mountain Stove to be covered by this warranty.
5 Reviews Hide Reviews Show Reviews
Rocky Mountain sells the proper 7/8 gasket for Lopi stove doors. Don't be fooled by cheaper 7/8 stove gasket that is thinner from Amazon.
Thanks Rocky Mountain
Nice fit for my Lopi Freedom
This door gasket worked great on my Lopi Answer wood stove. I ended up cutting 6-8 inches off to make it fit snug. Much better seal than the old ratty one that was on there! I can actually fully control the fire now! Works great with my damper.