Proud Sponsor of
HOMES FOR OUR TROOPS
HearthStone Gas Stove Blower
Item Number: 93-57010
Manufacturer: HearthStone Stoves
|HearthStone Gas Stove Blower Kit
Heat larger areas with the addition of fan kit from Hearth Stone.
This Blower is Designed for use on the following models
Santa Fe 8761
Tucson DV 8701
IMPORTANT NOTE: Use this kit on any of the stove models listed above. Do not use it on the previous versions of these models: Santa Fe 8760, Champlain 8300, Tucson DV 8700, or the Stowe 8320.
93-57010 KIT CONTENTS:
(1) Blower Assembly
(1) Hanger Mount (5930-125)
Zip Bag Contents:
(1) Control Knob (7200-602)
(1) L-Bracket (5930-120)
The blower is activated when the snap switch heats up (about 120
degrees F). It will take several minutes for the heat of the stove to
activate the snap switch. A rheostat controls the blower fan speed. The
rheostat knob is located on the right hand side of the blower housing.
Turn the knob clockwise to turn the blower on. The fan is on the highest
setting when it is first turned on. Continue to turn the knob clockwise
to reduce the fan speed until it reaches its lowest setting. If the fan
does not operate at the lowest setting, the rheostat requires
adjustment. Contact your dealer for rheostat adjustment. To turn the
blower off, turn the knob fully counterclockwise until it clicks into
the off setting.